Hiking the River Trail in Kings Canyon National Park
Distance (One Way): 2.8 miles / 4.5 km
The River Trail, also called the Kings Canyon River Trail, in Kings Canyon National Park, is a seldom-trafficked day hike in the Cedar Grove District, as it is often seen as nothing more than a connector trail between Roaring River Falls and Road’s End.
However, this is exactly what I think makes the River Trail one of the best hidden gems in Kings Canyon, because between the most popular sections along the Zumwalt Meadow Loop, there are beautiful caves, long, remote stretches to look for wildlife, and little-known swimming holes right off the trail—not to mention that the first 1.7 miles (2.7 km) between Roaring River Falls and the Zumwalt Loop is one of the least-trafficked sections in the entire Cedar Grove District!
This is all to say that the River Trail can make for a great one-way adventure if someone in your party isn’t interested in tagging along, and the trail in either direction can make for a quick and mostly flat adventure—especially when you plan a pickup from either trailhead!
River Trailhead Parking
Parking for the River Trail is located at either the Roaring River Falls Trailhead, about 3.0 miles (4.8 km) from the turn into Cedar Grove Village, or at Road’s End, the farthest trailhead on Highway 180 at the bottom of Kings Canyon.
Alternatively, the River Trail can begin at Zumwalt Meadow Trailhead, which is a great option for those interested only in the remaining 0.9 miles (1.4 km), which I often consider to be the most beautiful portion of the entire hike.
In any case, it goes without saying that Road’s End is one of the busiest trailheads at the bottom of Kings Canyon, especially since many parking spaces will be occupied by backcountry hikers during the busy summer travel season. Therefore, if you plan to hike from east to west, arriving early will make finding a spot that much easier.
Google Maps Directions: Roaring River Falls Trailhead / Road’s End Trailhead
Hiking Checklist - Sequoia-Kings Canyon
Here is a complete list of must-have things that you will want for any hike in Sequoia and Kings Canyon National Park.
That said, bear spray is purposefully excluded from this list because, while the Sierra Nevadas are home to a large Black Bear population, bear spray is not allowed in either Sequoia or Kings Canyon National Park.
Hiking the River Trail
As previously mentioned, the River Trail can either begin at Roaring River Falls, Zumwalt Meadow, or Road’s End, but on this day, I decided to start the hike from the Roaring River Falls Trailhead on the far western end.
River-Roaring River Falls Junction
After 0.1 miles (0.2 km), the Roaring River Falls Trail reaches the true River Trailhead.
Here, go left to begin the River Trail to Zumwalt Meadow, the least-trafficked part of the entire hike.
Read My Separate Post: Roaring River Falls Trail
Next to a number of other trails that ascend the steep slopes out of Kings Canyon, like the Don Cecil and Hotel Creek Trail, the River Trail traverses one of the flattest areas within the Cedar Grove District of Kings Canyon National Park, gaining only about 156 ft. (47.5 m) of elevation from the trailhead at Roaring River Falls to the trailhead at Road’s End.
Personally, I could not recommend buying a quality hooded sun shirt for hikes like the River Trail and many others in Sequoia and Kings Canyon, as it has, in my experience, proved to be one of the best ways to stay safe on these exposed trails.
Western River-Zumwalt Meadow Junction
After 1.8 miles (2.9 km), the River Trail meets the Zumwalt Meadow Trail, where the two share a short 0.4-mile (0.6 km) stretch from the Zumwalt Meadow bridge to the far eastern side of the loop where they split apart.
Read My Separate Post: Zumwalt Meadow Loop Trail
Zumwalt Meadow Loop Trail
Then, almost immediately after the Zumwalt Meadow bridge, the trail splits into a loop around the meadow.
That said, go right to continue hiking the River Trail toward Road’s End.
Read My Separate Post: Zumwalt Meadow Loop Trail
This short 0.4-mile (0.6 km) stretch, with the Zumwalt Meadow Loop, is almost always guaranteed to be the busiest section of the entire River Trail.
Elderberry is quite common in western North America, especially California.
Eastern River-Zumwalt Meadow Loop Junction
Once on the far side of the meadow, the Zumwalt Meadow Loop Trail splits away from the River Trail to begin the section that parallels the South Fork of the Kings River back to the trailhead.
That said, go right to begin what I often think of as the most beautiful stretch of the entire 2.7-mile (4.3 km) River Trail.
Read My Separate Post:Zumwalt Meadow Loop Trail
This cave, through these massive granite boulders on the River Trail, is one of the most impressive examples of trail work found anywhere in either Sequoia or Kings Canyon National Park.
River-Kanawyer Loop Junction
Shortly after the cave, the River Trail splits one last time with the Cedar Grove South Side Trail—more commonly known as the Kanawyer Loop—as it creates a roughly 3.6-mile (5.8 km) loop with the beginning of the River Trail, the South Side Trail, and the Mist Falls Trail, beginning and ending at Road’s End.
In any case, go left over the bridge to begin the final 0.2-mile (0.3 km) stretch to Road’s End.
River Trailhead (Road’s End)
Finally, after 2.8 miles (4.5 km), the River Trail reaches Road’s End, which serves as the trailhead for a number of other day hikes, such as the Mist Falls Trail, and multi-day overnight adventures, like the Rae Lakes Loop.
That said, ideally, hiking end to end as I have here means that you have a pickup arranged, instead of turning back around to Roaring River Falls. However, alternative options, such as walking back along the road, can be considered at roughly the same distance as re-hiking the River Trail.
Read My Separate Post: Mist Falls Trail
Sequoia National Park
Kings Canyon National Park
